本当問題の最も賢明な選択
この専門分野の発展とともに、試験の資料はますます多くなり、しかし、私たちのMicrosoft 070-659試験問題集は、私たちが長年にわたり多くの顧客の好評を獲得してきたことから、専業と正確さのために10年以上にわたって市場で主導的役割を果たしてきました。あなたの参照のための3種類があります。070-659最新問題集のPDF版---あなたの印刷をサポートして読みやすく、練習します。070-659最新問題集のソフトウェアのバージョン---実際のテストをシミュレーションし、あなたに正式な雰囲気を与える、毎日の練習のための最良の選択です。インストールの制限なしでWindowsシステムに適用されます。 070-659最新問題集のンオンライン版---複数のデジタルディバイスにインストールできます。最も魅力的な機能は、オフラインでの使用をサポートすることです。上記のすべての070-659学習資料は、不定期の割引を提供します。つまり、実際の質問は合理的な価格で利用できます。
行き届いたサービス
我々は10年以上にわたり070-659試験問題集とアフターサービスの専門職に集中している責任ある会社です。070-659の最新のダンプは、内容と効果のための大きな顧客の褒めを獲得します。合格率は95〜100%にアップしています。弊社は市場で問題集の専業と行き届いたサービスで高い評価を得ています。元のユーザーは、私たちの070-659学習教材は称賛に値すると考えます。他の問題集が必要とすれば、彼らは2番目の購入をします。我々はすべての方面で、最悪の結果でさえユーザーの利益を考慮するため、顧客と強力の関係を築きます—もしあなたは070-659試験問題集を利用してから、Microsoft 070-659試験に合格しないなら、弊社は全額返金を保証します。だから、あなたは何のロースもありませんが、素晴らしい経験を楽しむことができます。
Microsoft070-659試験問題集をすぐにダウンロード:成功に支払ってから、我々のシステムは自動的にメールであなたの購入した商品をあなたのメールアドレスにお送りいたします。(12時間以内で届かないなら、我々を連絡してください。Note:ゴミ箱の検査を忘れないでください。)
私たちは絶えず変化する世界に住んでいます。優位性があって目立つ唯一の方法は、十分な能力を持っていることです。そのペースに追いつくためには、Microsoft認定などの必要な証明書で自分自身を改善する必要があります。私たちの070-659試験問題集の質問では、この専門分野で十分な専門知識を身につけることによって、あなたの目標を達成することができます。私たちの070-659最新問題集は、あなたに高品質で正確なメッセージを提供することによってあなたを助けることができます。今、070-659の学習資料の機能を一緒に見てみましょう。
豊富な内容と1年間の無料アップデート
私たちの070-659試験問題の開発は、長い道のりを歩み、あなたの練習とレビューのための有益な知識と資料の3つのバージョンを形成します。だから私たちのMicrosoft 070-659最新問題集は購入後に、あなたに一年の最も正確の最新版を送ります。そして、私たちは、070-659の教材に新しい情報を追加します。実際の質問を購入した後、もし更新版があれば、すぐにあなたのメールボックスに送られます。私たちは070-659試験ブートキャンプの品質について保証されており、あなたは自信を持って私たちに信頼ことができます。あなたが試みる勇気を持っている限り、あなたは成功人の一つになることができます。さらに、私たちの070-659最新問題集質問は、合理的な価格があるので、認定試験にうまくパスしたいすべての人に利用られます。
Microsoft TS: Windows Server 2008 R2, Server Virtualization 認定 070-659 試験問題:
1. Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series.
A company has an environment that includes servers that run Windows Server 2008 R2 with Hyper-V.
The company requires that all server operating systems be provisioned as virtual machines (VMs). A server operating system should be provisioned as a physical server only if it does not function properly as a VM.
A new application that runs a Hyper-V supported version of Linux requires four CPUs and access to 3 terabytes of storage.
You need to install the application to meet the company requirements.
What should you do?
A) Assign 1 GB of startup RAM and 16 GB of maximum RAM to the VM.
B) Add an emulated network adapter to the VM and select the Enable spoofing of MAC addresses option.
C) Install the server application on a physical server with four CPUs.
D) Add a disk drive to the VM by using the Add-SharedVirtualDiskDrive PowerShell cmdlet.
E) Assign 4 GB of static memory to the VM.
F) Assign 1 GB of startup RAM and 8 GB of maximum RAM to the VM.
G) Install the server application in a VM with the latest supported integration components.
H) Add a disk drive to the VM by using the New-VirtualDiskDrive PowerShell cmdlet.
I) Add a synthetic network adapter to the VM and select the Enable spoofing of MAC addresses option.
J) Set the network adapter to use an iSCSl network tag.
K) Add a synthetic network adapter to the VM and select the Enable virtual network optimizations option.
L) Add an emulated network adapter to the VM and select the Enable virtual network optimizations option.
M) Add a disk dove to the VM by using the iscsicli.exe command line tool.
2. All servers on your network run Windows Server 2008 R2. You deploy Remote Desktop Services (RDS).
You are configuring the Remote Desktop Session Host (RD Session Host) role service. You install an application on all of the RD Session Host servers. The application communicates with a server that allows only one connection per IP address.
You need to configure the Remote Desktop IP Visualization settings for this application.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A) Enable Remote Desktop IP Visualization,
B) Disable Remote Desktop IP Visualization.
C) Set the IP Visualization mode to Per program.
D) Set the IP Visualization mode to Per session,
3. A company has a server that runs Windows Server 2008 R2 with Hyper-V. The Hyper-V server hosts several virtual machines (VMs). The disk configuration for the VMs is shown in the following table.
You are unable to perform an online backup of the VMs.
You need to ensure that you can perform online backups of the VMs.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A) Reformat Volume C and use the FAT file system.
B) Reformat Volume E and use the NTFS file system.
C) Reformat Volume D and use the FAT file system.
D) Convert Volume D to a Basic disk.
E) Convert Volume E to a Dynamic disk.
F) Convert Volume C to a Dynamic disk.
4. Your virtual environment includes Hyper-V host servers and VMware ESX Server hosts.
You manage the environment by using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2.
You need to enable non-administrative users to manage snapshots or checkpoints for virtual machines (VMs) that are hosted on either host system.
What should you do?
A) Create snapshots by using Hyper-V Manager.
B) Create checkpoints in VMM.
C) Create checkpoints by using the VMM Self-Service Portal.
D) Create snapshots from within the Virtual Machine Connection console.
5. Your company has an Active Directory Domain Services (AD DS) domain that includes an AD security group named Monitoring.
You are configuring a Windows Server 2008 R2 Hyper-V server that hosts several virtual machines (VMs).
You need to ensure that members of the Monitoring group can only stop and start VMs on the host server.
What should you do?
A) In Authorization Manager, add the Monitoring group to the Administrator role in the default scope.
B) Add the Monitoring group to the Server Operators AD security group.
C) In Authorization Manager, create a role in the default scope. Add the Stop Virtual Machine and Start Virtual Machine operations to the role. Assign the Monitoring group to the role.
D) In Authorization Manager, create a task that includes the Stop Virtual Machine and Start Virtual Machine operations. Add the task to the Administrator role.
質問と回答:
| 質問 # 1 正解: C | 質問 # 2 正解: A、C | 質問 # 3 正解: B、D | 質問 # 4 正解: C | 質問 # 5 正解: C |



